Siemens SITRANS P DS III Kompaktbetriebsanleitung Seite 51

Construction of pressure transmitter with PMC connection
Non-wetted parts materials
•
Electronics housing
Mounting bracket
Measuring cell filling
Process connection
Standard
•
Minibolt
•
Electrical connection
Han 8D is identical to Han 8U.
1)
Design for absolute pressure (from the differential pressure series), differential pressure and flow rate
Weight
Material
Wetted parts materials
•
Seal diaphragm
Pressure caps and locking
screw
O-ring
Non-wetted parts materials
•
Electronics housing
Pressure cap screws
Mounting bracket
Process connection
SITRANS P DS III/P410 (7MF4.33.. 7MF4.34.. 7MF4.35..)
A5E03434626-04, 05/2015
Copper-free die cast aluminum GD-AlSi 12 or precision cast stainless steel,
•
mat. no. 1.4408
Standard: Powder coating with polyurethane
•
Option: 2 coats: Coat 1: epoxy-based; coat 2: Polyurethane
Stainless steel nameplate
•
Steel or stainless steel
Silicone oil
•
Inert liquid
•
Flush mounted
•
1 / ''
• 1
2
PMC Standard design
•
Flush mounted
•
1''
•
PMC Minibolt design
•
Cable inlet using the following screwed joints:
Pg 13.5
•
M20 x 1.5
•
½-14 NPT
•
Han 7D/Han 8D plug
•
M12 connector
•
Approx. 4.5 kg (9.9 lb) for aluminum enclosure
Stainless steel, mat. no. 1.4404/316L, Hastelloy C276, mat. no. 2.4819, Monel,
mat. no. 2.4360, tantalum or gold
Stainless steel, mat. no. 1.4408 to PN 160, mat. no. 1.4571/316Ti for PN 420,
Hastelloy C4, 2.4610 or Monel, mat. no. 2.4360
FPM (Viton) or optionally: PTFE, FEP, FEPM and NBR
Non-copper aluminum die casting GD-AlSi 12 or stainless steel precision
•
casting, mat. no. 1.4408
Standard: Powder coating with polyurethane
•
Option: 2 coats: Coat 1: epoxy-based; coat 2: Polyurethane
Stainless steel nameplate
•
Stainless steel
Steel or stainless steel
/ -18 NPT female connection and flat connection with
1
4
thread in accordance with EN 61518 or M10 fastening screw thread in accordance
with DIN 19213 (M12 for PN 420 (MWP 6092 psi))
1)
/ -20 UNF fastening screw
7
16
49