Siemens SITRANS P DS III Kompaktbetriebsanleitung Seite 25

3. Connect the wires to the connecting terminals
Ensure the correct polarity! If necessary, ground the device using the "-" connection by connecting the "-" connection to
⑨
the ground terminal
4. If necessary, connect the shield to the screw of the ground terminal
protective conductor connection.
HART
①
Feed separator with integrated load
②
Auxiliary power
③
Cable entry for auxiliary power/analog output
④
Connecting terminals
⑤
Test connector for direct current measuring device or
connection for external display (not available with
PROFIBUS PA and Foundation™ Fieldbus FF)
Electrical connection, power supply
SITRANS P DS III/P410 (7MF4.33.. 7MF4.34.. 7MF4.35..)
A5E03434626-04, 05/2015
④
.
"+" and "-".
⑨
. This is electrically connected with the external
PROFIBUS PA / Foundation™ Fieldbus FF
⑥
Safety catch
⑦
Protective conductor connection/
equipotential bonding terminal
⑧
Process connection
⑨
Ground terminal
⑩
PROFIBUS PA / Foundation™ Fieldbus FF
23