Printing A Photo In Standard Sizes; Using Index Printing; Printing An Index Only - Sony UPA-PC105 Benutzerhandbücher

Printing a Photo in Standard Sizes

Several prints of one image can be output in standard
sizes.
Notes
• This operation can only be performed when the unit is
in Shop staff only mode.
For details about how to change the operation mode,
see "Changing the Operation Mode" (page 44).
• The size of print paper cannot be selected once the
procedure has been started. Before beginning this
procedure, please select the print paper size with the
configuration screen.
For details, see "[Shop staff only] button" (page 51).
1
At the screen for changing the output size, touch
[Shop staff only].
For details, see "Selecting the Output Service"
(pages 7, 13, 19).
The border selection screen opens.
2
Touch the type of border to use.
The standard size borders included in the selected
type are listed.
Subsequent procedures are the same as for creative printing.
Continue from Step 3 of "Creative Printing" (page 35).
38
GB
Output Services
Border types

Using Index Printing

An index (a sheet containing miniatures of selected
images, arranged in rows) can be printed along with the
selected images. The date and other information can be
printed on the index. If you use the UY-S90/S100 Film
Scanner, the Job ID can also be printed on the index.
Notes
• A UP-DR100 or DPP-EX5 printer is required for
index printing.
• You can print an index on any of the following paper
sizes:
– 3.5 × 5 Size
– 4 × 6 Size
• You can use the configuration screen to set up index
printing when writing image data to CD-R and to edit
the information printed with index printing.
For details, see "[Setting - Menu] Screen" (page 49).

Printing an Index Only

1
Touch the [Index] button on the output service
selection screen.
For details, see "Selecting the Output Service"
(pages 7, 13, 19).