Output Services; Printing On Different Paper Sizes - Sony UPA-PC105 Benutzerhandbücher

8
When you are done, touch the [Apply] button.
The display returns to the screen at Step 3.
9
Touch the [Apply] button.
The display returns to the screen at Step 1. You can
continue by editing another image or returning to
the output operation.
34
GB

Output Services

Output Services
A variety of output services can be used with this
system.
Note
The availability of some output services is determined
by what peripheral devices are connected to the system.
For details, refer to the output services described below
in this section. Further, outputting several prints of one
image in a standard size can only be performed when the
unit is in Shop staff only mode.
For details about how to change the operation mode, see
"Changing the Operation Mode" (page 44).

Printing on Different Paper Sizes

In addition to printing on 3.5 × 5 Size (90 × 130 mm),
you can print on the following paper sizes:
• 4 × 6 Size (100 × 150 mm)
• 5 × 7 Size (130 × 180 mm)
• 6 × 8 Size (150 × 200 mm)
• 8 × 10/8 × 12 Size (200 × 250/200 × 300 mm)
Note
In order to print on the selected paper size, the paper
must be set in a printer (the UP-DR100 or UP-D70A)
that use these paper sizes. For example, if 5 × 7 Size
paper is set in the printer, you can also print 4 × 6 Size
image data.
1
Touch [Other Size] on the output size selection
screen.
For details, see "Selecting the Output Service"
(pages 7, 13, 19).
The print size selection screen opens.