Key To Symbols And Safety Instructions - Bosch MC 400 Installationsanleitung

Contents
1

Key to symbols and safety instructions . . . . . . . . . . . . . . . . . 11

1.1 Key to symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.2 General safety instructions . . . . . . . . . . . . . . . . . . . . . . 11
2 Product details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.1 Important notices on usage . . . . . . . . . . . . . . . . . . . . . . 12
2.2 Function description/control strategies . . . . . . . . . . . . 12
2.2.1 Serial standard cascade . . . . . . . . . . . . . . . . . . . . . . . . 12
2.2.2 Serial optimised cascade . . . . . . . . . . . . . . . . . . . . . . . 12
2.2.3 Serial cascade with peak load coverage . . . . . . . . . . . . 12
2.2.4 Parallel cascade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.2.5 Output control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.2.6 Flow temperature control . . . . . . . . . . . . . . . . . . . . . . . 13
2.3 Setting the coding card . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.4 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.5 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.6 Additional accessories (system dependent) . . . . . . . . 14
2.7 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.2 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.2.1 Connecting the BUS connection and temperature
sensor (extra-low voltage side) . . . . . . . . . . . . . . . . . . .14
3.2.2 Connecting the power supply, pump and mixer
(mains voltage side) . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
3.2.3 Connection diagrams with system schematics . . . . . . 15
3.2.4 Overview of the terminal assignment . . . . . . . . . . . . . . 16
4 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1 Setting the coding card . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.2 System and module commissioning . . . . . . . . . . . . . . . 17
4.2.1 Settings for systems with a cascade module
in the BUS system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
4.2.2 Settings for systems with two or more cascade
modules in the BUS system . . . . . . . . . . . . . . . . . . . . . .17
4.3 Status display for the heat source/lower level
cascade modules on the subordinate cascade
module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
4.4 Status display for the heat source on the lower
level cascade module . . . . . . . . . . . . . . . . . . . . . . . . . . .17
4.5 Cascade settings menu . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.6 Diagnosis menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.1 Status indicator on the individual installed
or higher-level cascade module . . . . . . . . . . . . . . . . . . .19
5.2 Status indicator on the lower-level cascade module . . 19
6 Environment / disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
MC 400
1 Key to symbols and safety instructions
1.1 Key to symbols
Warnings
Warnings in this document are identified by a warning
triangle printed against a grey background.
Keywords at the start of a warning indicate the type and
seriousness of the ensuing risk if measures to prevent
the risk are not taken.
The following keywords are defined and can be used in this document:
• NOTICE indicates a situation that could result in damage to property
or equipment.
• CAUTION indicates a situation that could result in minor to medium
injury.
• WARNING indicates a situation that could result in severe injury or
death.
• DANGER indicates a situation that will result in severe injury or
death.
Important information
This symbol indicates important information where
there is no risk to people or property.
Additional symbols
Symbol Explanation
▶ Step in an action sequence

Cross-reference to another part of the document
• List entry
- List entry (second level)
Table 1
1.2 General safety instructions
These installation instructions are intended for a competent person.
▶ Read the installation instructions (heat appliances, modules, etc.)
before installation.
▶ Observe safety instructions and warnings.
▶ Observe national and regional regulations, technical rules and
guidelines.
▶ Keep a record of any work carried out.
Determined use
▶ Use the product only to control heating systems within cascade
systems. In a cascade system, several heat sources are used to
achieve greater heat output.
Any other use is considered inappropriate. Any damage that may result
is excluded from liability.
Installation, commissioning and maintenance
Installation, commissioning and maintenance must only be carried out
by a competent person.
▶ Never install the product in wet rooms.
▶ Only install genuine spare parts.
Electrical work
Electrical work must only be carried out by qualified electricians.
▶ Before carrying out electrical work:
- Isolate all poles of the mains voltage and secure against
accidental reconnection.
- Ensure the system has been isolated from the supply.
Contents | 11
6 720 809 453 (2014/12)