Bosch Rexroth PRC 7 00-L Serie Bedienungsanleitung Seite 39

R911415883 | PRC 7x00-Lx/Wx-0130
No. PRC7000 Inputs
10 NewSpotSelection
Not used
11
EndOfComponent
12
Not used
13
Ghostrun
14
WeldEnableFieldBus
15
SpotExtensionType Bit0 - 7
16..23
24..47 SpotSelection Bit0 - 23
ASCIIByte0 Bit0 – 7
48..127
...
ASCIIByte9 Bit0 - 7
TipNumberVisu Bit0 - 7
128..135
AckTipDressedVisu
136
AckTipChangedVisu
137
AckTipDresserBladeChangedVisu
138
139 AckGunChangedVisu
Not used
140..143
Description
short-circuit-welding with tip-check-mode
"ResistanceCalibration" to measure the tip-resistance and
create a reference-curve.
The new spot selection is read with a rising edge of this
signal
For details see function description "Program start and spot
selection" chapter 7.1.5
Without function
This signal is used to signal the end of Componenet in the
weld-protocol
Without function
Next Weld Process is a "Ghost Run" without current but all
counters will increase.
Enable Welding with current for the next weld-process
Spot extension: inputs for selecting the first fragment of spot
selection
A new spot/programm number
is read on a rising edge at this input 10 "new spot selection".
10 characters component identifier (ASCII coded);
ASCIIByte0 is interpreted as first character
• The characters will be entered to the actual weld protocol.
Select a Tip-number for Visu and Tipmanagement via Visu
Feedback signal for dressed electrode
With a rising edge on this signal, wearcounter for Tip 1 will
be reset, dresscounter for the tip and dresscounter for the
tipdresser selected by TipNumberVisu will be counted up.
Feedback signal for changed electrode
With a rising edge on this signal, wearcounter and
dresscounter for the Tip selected by "TipNumberVisu" will be
reset.
Feedback signal for changed Tip dresser blades.
With a rising edge on this signal, wearcounter for the
Tipdresser selected by "TipNumberVisu" will be reset.
Feedback signal for changed Gun
With a rising edge on this signal, all counters for the Gun selected by
"TipNumberVisu" will be reset.
Without function
Bosch Rexroth AG 39/40