Inhaltsverzeichnis
Werbung
All manuals and user guides at all-guides.com
ATX 12V Power Connector
(8-pin ATX12V1)
(see p.2 No. 3)
Though this motherboard provides 8-pin ATX 12V power connector, it can still work
if you adopt a traditional 4-pin ATX 12V power supply. To use the 4-pin ATX power
supply, please plug your power supply along with Pin 1 and Pin 5.
Serial port Header
(9-pin COM1)
(see p.2 No. 19)
2.8
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.9
Installing Windows
/ XP 64-bit Without RAID Functions
®
If you want to install Windows
bit OS on your SATA / SATAII HDDs without RAID functions, please follow below
procedures according to the OS you install.
2.9.1
Installing Windows
Functions
®
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE].
®
STEP 2: Install Windows
XP / XP 64-bit OS on your system.
ASRock H61DEL Motherboard
Please connect an ATX 12V
8
5
power supply to this connector.
4
1
4-Pin ATX 12V Power Supply Installation
This COM1 header supports a
serial port module.
®
TM
7 / 7 64-bit / Vista
/ Vista
TM
TM
7 / 7 64-bit / Vista
/ Vista
64-bit / XP / XP 64-
®
XP / XP 64-bit Without RAID
XP / XP 64-bit OS on your SATA / SATAII HDDs
Advanced screen
SATA Confi guration.
8
5
4
1
TM
64-bit / XP
23
Werbung
Inhaltsverzeichnis
