Dmx Mode; Dmx-Protocol - EuroLite LED Hybrid PUS-5 Bedienungsanleitung

DMX MODE

The LED display allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED Hybrid PUS-5 will respond to the controller.
Addressing
Press the MODE button until the display shows one of the DMX modes CH2 or CH4, then press the ENTER
button to confirm.
Set the desired address via the UP or DOWN buttons (d001 - d512).
Please press the ENTER button again to confirm.
Controlling:
After having addressed the LED Hybrid PUS-5, you may now start operating it via your lighting controller.

DMX-protocol

2-Channel Mode:
Channel 1 - Auto Programs
Value:
000 – 015
016 – 089
090 – 164
165 – 240
241 – 255
Channel 2 – SMD Strobe
Value:
000 – 000
001 - 255
Function:
Blackout
Auto program slow
Auto program middle
Auto program fast
Auto program sound control
Function:
No function
Flash, with increasing speed
23/26 00069677.DOC, Version 1.1