Installation; Rigging - EuroLite LED Hybrid PUS-5 Bedienungsanleitung

Rear
3
4
5
6
7

INSTALLATION

Rigging

Please consider the EN 60598-2-17and the respective national standards during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
MODE UP DOWN ENTER MODE UP DOWN ENTER
SAFETY ROPE SAFETY ROPE
MICROPHONE MICROPHONE
SENSITIVITY SENSITIVITY
POWER OUTPUT POWER OUTPUT
POWER SUPPLY: POWER SUPPLY:
100 - 240V AC, 50/60 Hz ~ 100 - 240V AC, 50/60 Hz ~
Fuse: T 1 A, 250V Fuse: T 1 A, 250V
10
8
9
DANGER TO LIFE!
DMX IN DMX IN
DMX OUT DMX OUT
13
12
11
19/26
3. Mounting bracket
4. Fixation screws
3
5. Attachment eyelet
6. Microphone
4
7. Rotary-control
8. Power Out socket
9. Power supply
10. Fuse holder
11. LED screen
operating buttons
12. DMX Out socket
13. DMX In socket
00069677.DOC, Version 1.1
and