Schritte
1. Ziehen Sie das Klebeband ab, mit dem das Kamerakabel an der hinteren Bildschirmabdeckung befestigt ist.
2. Trennen Sie das Kamerakabel von der Kamera.
3. Hebeln Sie das Kameramodul vorsichtig beginnend an der Unterkante des Kameramoduls ab.
4. Heben Sie das Kameramodul aus der hinteren Bildschirmabdeckung.
Installing the camera module
VORSICHT:
The information in this section is intended for authorized service technicians only.
Voraussetzungen
If you are replacing a component, remove the existing component before performing the installation process.
Info über diese Aufgabe
The following images indicate the location of the camera module and provide a visual representation of the installation procedure.
Abbildung 3. Installing the camera module
Entfernen und Installieren von vor Ort austauschbaren Einheiten (FRUs)
109