Installing The M.2 Solid State Drive (Ssd) - Dell P60F Anweisungen

GUID-87D66EC4-150F-49DA-9128-FC7EF637032E

Installing the M.2 Solid State Drive (SSD)

NOTE: Before installing SSD card, ensure that the battery is fully charged or the power cable is plugged in.
1 Place the SSD clip on the computer.
2 Tighten the M2.0x3.0 screw that secures SSD clip to the computer.
3 Insert the SSD into the socket on the computer.
4 Tighten the M2.0x3.0 screw to secure the SSD to the computer.
5 Affix the adhesive tape following the SSD card.
NOTE: For models shipped with NVMe SSDs, the SSD requires installation of a thermal plate over it.
6 Install the:
a battery
b base cover
7 Follow the procedure in After working inside your computer.
Entfernen und Einbauen von Komponenten 17