Dell P127F Benutzerhandbuch Seite 125

2. Remove the SIM card.
3. Remove the base cover.
4. Remove the 4G WWAN card
5. Remove the WLAN card.
6. Remove the memory modules.
7. Remove the M.2 2230 or
8. Remove the M.2 2230 solid-state drive from Slot
9. Remove the battery.
10. Remove the assembly-inner
11. Remove the system board.
ANMERKUNG: The system board can be removed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
12. Remove the display assembly.
13. Remove the smart-card
14. Remove the fingerprint
Info über diese Aufgabe
ANMERKUNG: When replacing the palmrest assembly, transfer the dummy SIM filler to the new palmrest assembly.
The following images indicate the location of the palm-rest assembly and provide a visual representation of the removal procedure.
or 5G WWAN card, as applicable.
M.2 2280 solid-state drive from Slot 1, as applicable.
2, if applicable.
frame.
reader, if applicable.
reader, if applicable.
Entfernen und Installieren von vor Ort austauschbaren Einheiten (FRUs) 125