Before Operation; Oil Feeding And Mixing - maruyama MS0835W Bedienungsanleitung

Wide nozzle
After confirming the packing is in place, securely tighten nozzle pipe to grip, and wide nozzle to nozzle pipe. Tighten the screw
securely after confirming the packing to make ensure there is no water leakage. Over-tightening will cause extrusion or break the
packing. Correct tightening pressure is important.
Attachment and removal of a strainer
● When removing the strainer, make the rib horizontal or
vertical.
● To fix the strainer, rotate it 45 degrees from horizontal or
vertical.
Rib
Chemical tank Strainer
Oil feeding
● Make sure you use blended fuel.
● Use exclusive oil for two-cycle engine engines.
● Neither overfill nor spill the fuel on to the engine.
Gasoline ： Exclusive oil
50 ： 1
filler opening
DANGER
There is a possibility of fuel igniting. Make sure you observe the
following items.
● When feeding fuel, stop the engine and ensure no source of
fire such as cigarette is close to the area.
● Don't spill fuel. If fuel is spilled, wipe it all off at once and start
the engine after it is dry.
● When a fuel leakage is found, use the engine after repair are
done.
● After feeding fuel, make sure you close the fuel tank cap.
● When starting the engine, be more than three meters from
the supply tank.
CAUTION
● Use lead-free gasoline for automobiles for fuel.

Before operation

Assembly of nozzle
Nozzle pipe
Discharge port
End of spraying hose
Rib
45°
45°
Chemical tank Strainer

Oil feeding and mixing

Ball cock
Grip
The adjustment of strap
1. Tighten the knapsack strap
Pull the strap downward.
3.Pull the chest strap to tighten.
Mixing chemicals
● Read the instructions for the chemical to be used carefully
and follow the mixing method and cautions for use.
● After confirming the proper placement of the chemical cover,
close the cover securely. Otherwise, chemicals will spill and
you might be covered with them when you carry the machine
on your back.
Chemical tank lid
Spraying hose assembly
Nozzle holder is provided in the top
of chemical tank
2. Loosen the knapsack strap
Lift strap buckle upward to
loosen.
Close securely
4