Functional Description; Intended Use; Product Features - Bosch PVS 300 AE Originalbetriebsanleitung

18 | English
Safety Warnings for Operation without
Base Unit
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Apply the machine to the workpiece only
when switched on and switch the machine
off only after it has been lifted away from
the workpiece. The power tool can move sud-
denly.
Always wait until the machine has come to a
complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Safety Warnings for Operation with Base
Unit
Connect the machine securely to the base
unit and fasten it firmly against movement.
The machine can move suddenly.
The On/Off switch must be well-accessible
at all times. Switching off the machine easily
must be possible at all times.
Guide the workpiece only against the
switched-on machine and do not switch the
machine off until after having removed the
workpiece. The workpiece can move sudden-
ly.
1 609 929 M21 | (22/8/07)

Functional Description

Read all safety warnings and all in-
structions.
warnings and instructions may result
in electric shock, fire and/or serious
injury.

Intended Use

The machine is intended for dry sanding of wood,
plastic and metal with high removal rates. It is
particularly suitable for the machining of profiles,
corners or hard-to-reach areas.

Product Features

The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Vacuum connection
2 Thumbwheel for belt speed preselection
3 On/Off switch
4 Sanding belt
5 Adjustment knob for belt run
6 Clamping lever for sanding belt
7 Venting slots
8 Auxiliary handle*
9 Bolt hole
10 Sliding shoe
11 Guide roller
12 Tensioning roller
13 Openings
14 Base unit*
15 Stop rail
16 Quick-action clamp*
17 Guide bolt(4x)
18 Wing bolt
19 Screw
20 Stop
21 Plastic guide
22 Groove for stop 20 as parallel guide
23 Groove for stop 20 as angle guide
*The accessories illustrated or described are not in-
cluded as standard delivery.
Failure to follow the
Bosch Power Tools