Inhaltsverzeichnis
Werbung
15. TROUBLESHOOTING:
GB
Symptoms
1
When first used, the mixed water is only hot or cold.
2
No flow of mixed water, or only flow in end positions
of the handle.
3
Mixed water flows only intermittently, and the flow is
too weak except in end positions of the handle.
4
Insufficient flow.
5
The mixed water temperature follows the rotation of
the handle, but with a delay.
6
Mixer does not regulate.
7
Pump does not start.
8
No display on keypad.
9
Little or no massage flow.
Pump runs intermittently.
10
Spot lamp does not light up.
11
Filling does not work.
12
Steam bath does not light up.
In all cases, the technical service of Sealskin (+31 (0) 416 672 672)
will be able to answer the various questions you may have, and solve
any problems.
For further information concerning the installation or use of your
hydromassage shower, please contact your dealer. See our website
www.sealskinXtremewellness.com for your local retailer.
Causes
Water supply incorrect.
One water supply is not working.
One water supply is not working adequately.
Insufficient supply.
Mixer out of regulation.
Pressure difference between hot and cold water sup-
ply too great (exceeds 2:1)
Control valve blocked.
Contamination prevents good functioning.
Cubicle is not switched on.
Water level in tray insufficient.
Steam generator working.
Pump shaft blocked.
No starting authorisation.
Unknown.
No electrical supply.
Connector incorrectly connected.
Water level in tray insufficient.
Drain poorly closed.
No chromed mushroom on intake filter.
Unknown.
Unknown.
Bulb faulty.
Pump start-up authorisation is permanently on.
Filling does not stop.
Steam generator blocked with limescale.
15
Werbung
Inhaltsverzeichnis
