Technical Data - Stabila Receiver REC 200 Bedienungsanleitung

Technical data

Working Radius:
Detection Height:
Accuracy -
NormalMode
Industrial Alignment Mode
Reception Angle:
Detectable Spectrum:
Beeper Volumes:
Power Supply:
LCD Backlighting:
Battery Life:
Automatic Shut Off:
Operating Temp:
Storage Temp:
Tip:
Remove the batteries if the unit will not be used for a long period !
- The person in charge of the detector must understand the instructions in this
manual and ensure other users do also.
- Periodically carry out test measurements, particularly after the detector has been
subjected to abnormal use and before and after important measurements.
When you're not using the laser, store it in its pouch/carrying case.
Recycling programme for our EU customers:
In accordance with the WEEE regulations, STABILA provides a disposal
programme for electronic products at the end of their service life.
For more details, please contact:
www.STABILA.de / Recycling
or:
0049 / 6346 / 309-0
1 m - 300 m Laser dependent
50 mm
Super Fine: ± 0,50 mm
Fine: ± 1,0 mm
Medium: ± 2,0 mm
Coarse: ± 3,0 mm
Zero: ± 0,0 mm
Fine: ± 0,64 mm
Coarse: ± 0,0127 mm
± 45°
610 nm to 900 nm
Loud: 110 dBA
2 x 1.5 Volt "AA" batteries
Yes, front and rear
90 hours
Selectable - 30 minutes, 24 hours, Off
-20°C to +60°C
-40°C to +70°C
15
Low: 90 dBA