Battery Safety - Husqvarna 120iBV Bedienungsanweisung

a day. Continual and regular users should have
their hearing checked regularly. Note that hearing
protectors limit the ability to hear sounds and
warning signals.
• Use approved eye protection. If you use a visor,
you must also use approved protective goggles.
Approved protective goggles must comply with the
ANSI Z87.1 standard in the USAs or EN 166 in EU
countries.
• Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above shoulder
level.
• Keep first aid equipment close at hand.
• A breathing mask should be used when there is a
risk of dust.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
• In this section the product's safety features, its
purpose and how checks and maintenance should
be carried out to ensure that it operates correctly.
See instructions under the heading
on page 2 to find where these parts are located on
your product.
• The life span of the product can be reduced
and the risk of accidents can increase if product
maintenance is not carried out correctly and
if service and/or repairs are not carried out
2034 - 002 - 17.01.2023
Read the warning
Product overview
professionally. If you need further information please
contact your nearest servicing dealer.
• Never use a product with defective safety
components. The product's safety equipment must
be inspected and maintained as described in this
section. If your product fails any of these checks,
contact your service agent to get it repaired.
• All servicing and repair work on the product requires
special training. This is especially true of the
product's safety equipment. If your product fails any
of the checks described below you must contact your
service agent. When you buy any of our products we
guarantee the availability of professional repairs and
service. If the retailer who sells your product is not
a servicing dealer, ask him for the address of your
nearest service agent.
To do a check of the keypad
1. Push and hold the start/stop button (A).
a) The product is on when the LED (B) comes on.
b) The product is off when the LED (B) is out.
User interface on page 14 if the warning
2. Refer to
indicator (C) comes on or flashes.
3. Push and release the power wheel (D) to make sure
that it moves freely.

Battery safety

WARNING:
instructions that follow before you use the
product.
• Only use the 40-B series batteries that we
recommend for your product. Refer to
batteries on page 17 . The batteries are software
encrypted.
• Use the rechargeable 40-B series batteries as a
power supply for the related Husqvarna products
only. To prevent injury, do not use the battery as a
power supply for other devices.
• Risk of electrical shock. Do not connect the battery
terminals to keys, screws or other metal. This can
cause a short circuit of the battery.
• Do not use batteries that are non-rechargable.
• Do not put objects into the air slots of the battery.
Read the warning
Approved
7