Schildkröt JUNGLE 970518 Bedienungsanleitung Seite 3

No responsibility for the stability can be assumed for swing frames with crossbeams. The information provided by the
manufacturer applies here. When installing the swing on a standard swing frame, the minimum distance to adjacent devices
(e.g. supports, etc.) must be at least 40cm. The center-to-center distance between uppermost suspension points of the swing
assembly (=A) must be minimum 36cm. If you fix the swing on the Jungle line, make sure that you keep this distance.
A
TOP BAR
H
B
GROUND LEVEL
Fastening the swing to safety carabiners:
First attach the safety carabiners to the Jungle Line (before tensioning).
To open the safety carabiner, turn the integrated lock (fig.1).
Only attach the open safety carabiners to the intended loops. Never attach the safety carabiners outside the loops (fig.2+3).
To close the safety carabiner, turn the lock again. When attaching and detaching the safety carabiner, the Jungle Line strap
must not be tensioned.
Attach the swing only to two safety carabiners (fig. 4), never to only one carabiner (fig. 5). Only attach the swing to two
consecutive loops on the Jungle Line.
Warning! Strangulation hazard.
1
Obligatory stress test:
Before using the swing for the first time, carry out the required stresstest.
The swing must be tested with 100kg (fig. 6).
Either attach a 100kg weight directly to the swing or have two people
with a combined weight of 100kg slowly hang from the swing.
If you notice any audible or visible signs of damage (cracking noises,
fraying, etc.), stop the test immediately.
Relocate and/or replace damaged parts.
Storage and maintenance:
Store the product out of the reach of children at a dry and dark place. Protect the product from direct sunlight and other heat
sources. This affects the lifetime and makes the material aging faster. To prolong the lifetime, the product should be
disassembled when not in use. The swing must be inspected and maintained for damage, wear and tear (fraying, alterations
to the webbing, breaks, cuts, damaged stitching, deformation, etc.) before and after each use. Neglected inspection and
maintenance can lead to serious injury by material failure. Only clean the product with a damp cloth. Do not use detergents,
water only.
Disposal:
Bring the packaging and the product at the end of its lifetime to a return and collection system. You can obtain information
on this from your local waste disposal company.
If you have any questions about this product please contact us: info@mts-sport.de
IMPORTEUR: MTS Sportartikel Vertriebs GmbH, Hans-Urmiller-Ring 11, 82515 Wolfratshausen, Germany
A = the center-to-center distance between uppermost suspension points of the swing
assembly
B = the center-to-center distance between the swing seat attachment points
H = the distance between the uppermost suspension points and the protective surfacing
(=250cm)
2 3 4 5
100 kg
6