Symbols; Cleaning - wohner CrossMT CrossBoard Bedienungsanleitung

CrossMT Operating Instructions
Overvoltage category
Pollution level
Auxiliary inputs
Rated actuating voltage
Rated actuating current
Switching level active / logic 1
Switching level not active / logic 0
Maximum input voltage
Auxiliary outputs
Rated output voltage
Maximum output current per output*
Electronic overcurrent shutdown
Electronic overtemperature shutdown**
Standards / Regulations
Standards
UL approval
Approved accessories
* Unless otherwise noted, all voltage and currents are RMS values and referred to conductor-earth-
connection
** note derating

Symbols

Use copper lines approved for at least 75°C
3 Phase alternating current

Cleaning

The surface of the device can be cleaned with a dry cloth
i
Never perform cleaning while the device is in operation!
Page 52 of 53
for voltages ≤ 300 VRMS: III
for voltages ≤ 600 VRMS: II
2
24 VDC
1 mA
16,8 V
7,2 V
26,4 VDC
24 VDC typ.
2 A
2,7 – 6,0 A
150 °C
IEC/EN/UL
EMC 61326
E527320
See chapter 4
36 400 000 A
English.
61010-1, 61010-2-030
Revision 05/2023