CrossMT Operating Instructions
7.2.2 Disassembly
•
By operating both locking levers the control plug is
released and can be removed (Image 7)
•
The CrossMT is removed from the CrossBoard® by
levering the unlocking facility (top or bottom) with the
help of a screw driver (Image 8)
•
A size 0,8x4 screw driver is recommended
Image 8
Release of the CrossMT
7.3 Connection
Image 4
Connection control plug
The control connection is realized via an 8-pin plug connector. Connect the lines to the plug
connector on the measuring technology adapter. The auxiliary inputs and outputs are not
Page 37 of 53
Image 7
Release of the control plug
Pin Nr.
Function
1
+24 V
2
C/Q Wire
3
GND
4
Relay drive 2
5
Relay drive 1
6
Digital input 1
7
Digital input 2
8
Digital input 3
36 400 000 A
English.
Revision 05/2023