Mounting Of Devices On Top (Mounted Devices) - wohner CrossMT CrossBoard Bedienungsanleitung

CrossMT Operating Instructions

7.2.1 Mounting of devices on top (Mounted devices)

Mounted devices with CrossBoard®-interface are directly snapped onto the CrossMT. In
case of a preliminary placement of the CrossBoard® with several CrossMT, please note the
respective width of mounted devices. In case of the 49,5mm-wide NH fuse switch-
disconnector size 000 (Art. 33800) the use of the indicator bar is recommended (s. Image 5)
Image 5 Mounting of devices onto the CrossMT
The following devices are allowed to be mounted on to the measurement module (see also
chapter 4):
Image 6 Allowed mounted devices
Page 36 of 53 36 400 000 A
English.
Revision 05/2023