cecotec ROCK'NGRILL SMART Bedienungsanleitung Seite 14

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Handle
2. Control panel
3. Top plate
4. Lower plate
5. Plate release button
6. Safety lock
7. Fat-drip tray
8. 180º button
Control panel
Fig. 2
1. Preheating light indicator
2. Temperature light indicator
3. Grilling level indicator
4. Medium
5. Medium-Well
6. Well done
7. Temperature buttons +/-
8. Display
9. Food-type button
10. Manual temperature button
11. On/off button
2. BEFORE USE
- Take the product out of the box.
- Remove all packaging material. Save the original box.
- Make sure all parts and components are included and in good conditions. If any visible
signs of damage are observed, contact the Technical Support Service immediately.
- Clean the plates with a soft, dampened cloth.
- Dry thoroughly all parts of the device with a cloth or paper towel.
- For optimal results, cover both plates with some oil.
Warning
A slight odour and smoke might appear when operating the device for the first time. This is due
to manufacturing material residues and does not affect the appliance's operating.
ROCK'N GRILL SMART
26
3. OPERATION
1. Connect the product's plug to a power supply. The product will beep, and all the lights will
flash once. The power switch light will flash once. The power light indicator will continue
to blink.
2. Press the power button, the product will beep. The product will begin to warm up and the
display will light up accordingly as it reaches optimum operating temperature (220 ºC).
This heating process will take about 5 minutes.
3. When the warm up is completed, the product will beep 3 times. The preheating light
indicator will switch off and the temperature light indicator will light up.
4. Put the food inside the grill and select the desired temperature manually or select a
programme.
5. The display screen will show the minute countdown left for the food to be cooked (only
when a programme is selected).
6. When food is cooked, the product will beep 3 times and stop heating. The power button will
flash continuously, the rest of the light indicators will turn off (only when a programme
is selected).
7. Use the handle to open the grill and use a heatproof spatula to remove food.
8. Once you have finished cooking, disconnect the plug from the wall outlet and leave the
unit open until it cools down.
Warning
Never use metal tongs or a knife to remove food as these can cause damage to the non-stick
coating.
Cooking programmes
Steak:
1. Press the Steak button, the product will beep.
2. The 3 grilling level indicators will flash.
3. Select the desired grilling level with the + and - buttons.
4. The grill will start automatically after 10 seconds approx.
5. Once the steak is placed on the grill, the steak light will light up, and the product will
beep 3 times when the steak is finished. All the light indicators except for the power
button will turn off.
Sausages:
1. Press the Sausage button, the product will beep.
2. The 3 grilling level indicators will flash.
3. Select the desired grilling level with the + and - buttons.
4. The grill will start automatically after 10 seconds approx.
ENGLISH
ROCK'N GRILL SMART
27