Supplied Base Configura On; First Use; Base Configura On - Decathlon FW500 Gebrauchsanweisung

Avoid leaning forward excessively, as there is a risk of overturning if the centre of gravity is shi ed too
far.
Always nego ate slopes greater than 6° with an assistant.
Refrain from raising the wheelchair without assistance.
3. Supplied base configura on
The FW500 fencing wheelchair comes ready-to-use with a standard configura on of the variable parameters.
3.1

First use

The wheelchair is shipped with the rear wheels removed. To posi on the front wheels, hold down the axle
bu on to add the wheel onto the axle and then push it into the special guide of the wheelchair's frame, then
release the bu on. It is advised that you check the pressure of the wheels before use, ensuring they're at 7.6
BAR. The infla on pressure is indicated on the sides of the tyre covers. Nevertheless, it is recommended to
always check that the drive wheels are inserted correctly before using the wheelchair, namely by checking
that the bu on has been released, and by trying to pull the wheel outwards without pressing on the bu on.
3.2 Base configura on
The FW500 wheelchair comes with the following adjustment:
Seat width:
Main wheel:
Seat depth:
Backrest height:
Handle height:
Handle depth:
Rim height of sword arm:
Rim height of non-sword arm:
Front swivel wheels:
Backrest incline:
Front height of the seat in rela on to the ground
Rear height of the seat in rela on to the ground
Centre of gravity:
Distance of the footrest rela ve to the seat:
Cushion H 100 mm
Thigh strap H 80 mm
L as required
W 25"
D 400 mm
HS 250 mm
HM 220 mm (from seat)
120 mm
HSA 80 mm
HNSA 200 mm
125 mm rota ng
IS 90°
FH 530 mm
RH 5300 mm
D 90 mm
FD 350 mm
L x 400 mm
1600 mm if L = 400 mm
1800 mm if L = 460 mm
6