Adjus Ng And Replacing The Hand Grip; An - Lt (Op Onal) - Decathlon FW500 Gebrauchsanweisung

4.8

Adjus ng and replacing the hand grip

The hand grip can be assembled into three different posi ons to create a larger or smaller distance "A" from
the wheel hoop. To access the hand grip a achment screws, you need to remove the cover, the air chamber
[paragraph 6.1] and the protec on flap (G).
To remove the hand grip from the wheel, you need to completely remove all six a achment screws (F). Once
the hand grip has been removed, you can rea ach it by selec ng one of the three possible posi ons on the
a achment tabs (see illustra on).
Once the hand grip has been re-a ached, proceed with the reposi oning of the flap (G), making sure to match
up the hole for the valve with the corresponding hole in the hoop. We recommend centring the flap (G)) over
the hoop to ensure maximum protec on for the air chamber.
4.9

An - lt (op onal)

The FW500 can be fi ed with a device to prevent the wheelchair from pping backwardsTo ac vate or
deac vate it, pull and turn the tube as shown below.
10