Trouble Shooting - Hedson IRT UV SPOTCURE2 Bedienungsanleitung

8. Trouble shooting

Filter replacement symbol
See 7. User Maintenance Instructions > Filter and
9. Spare parts.
High temperature / Overheating
High temperature, symbol is flashing:
Wait until temperature drops.
Check ambient temperature. Maximum is 40°C.
Check filter. Replace filters: See 9. Spare Parts List
Clean the protective glass >
7. User Maintenace Instructions
Service symbol with code
Error code
Check product identity label, see chapter 6, and refer
to Serial No and Produced when contacting Hedson
support, see below.
Contact Hedson Technologies Support for service:
support@hedson.com
Fan
Speed controlled fan depending on LED temperature
8 8
EN
715423 rev 2