Hedson IRT UV SPOTCURE2 Bedienungsanleitung Seite 3

IMPORTANT SAFETY INSTRUCTIONS
WARNING!
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY
TO PERSONS:
When using an electrical equipment, basic precautions should always be followed, including the following:
Read all instructions before using IRT UV SpotCure2.
This equipment is only to be used by qualified and trained personell. See the training section in this manual.
Know how to turn off the product. Be thouroughly familiar with the controls.
Stay alert - watch what you are doing.
Do not operate the product when fatigued or under the influence of alcohol and drugs.
Keep danger zone clear of all persons.
Do not place the equipment on an unstable surface.
Follow the maintenance instructions specified in the manual.
Store these instructions in an area provided on the equipment.
1 Do not allow to be used as a toy.
2 Use only as described in this manual. Use only manufacturer's recommended attachments.
3 Before accessing live parts, remove the main connector from the wall socket. Only professional electricians may have direct
access to the electrical components.
4 Do not use with damaged cord or plug. If equipment is not working as it should, has been dropped, damaged, left outdoors or
dropped into water, return it to a service center.
5 Do not pull or carry by cord, use cord as a handle, close a door on cord or pull cord around sharp edges or corners. Keep cord
away from heated surfaces.
6 Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
7 Do not handle plug or equipment with wet hands.
8 Do not store, prepare or use solvent-containing materials within a 5 m/16 feet radius of the curing device.
9 Flammable materials should not be placed close to a curing device in use.
10 Never direct the curing device towards highly combustible materials.
11 The curing device must not be exposed to paint fog, sanding dust or solvents due to fire and explosion risk. Furthermore, the
lifetime of the appliance will also be reduced.
12 Operated by highly dangerous electric voltage.
13 This product should only be used with the glass intact.
14 As appropriate measures; always wear eye protection during work in areas exposed to UV radiation and always work in a well-
ventilated environment.
15 The curing device user must adhere to these operating instructions. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for their safety.
16 Do not use in wet or moisture conditions.
17 These products are intended to be operated only in the presence of qualified professional operators who have been trained on
mandatory operation procedures for proper use of the equipment.
SAVE THESE INSTRUCTIONS
715423 rev 2
EN 3 3