Important Safety Instructions - Hedson IRT UV SPOTCURE2 Bedienungsanleitung

IMPORTANT SAFETY INSTRUCTIONS

WARNING!
UV radiation can cause personal injury
and property damage! UV emitted
from this product. Skin or eye injury
may occur. Avoid exposure of eyes
and skin to unshielded lamp.
Summary of results from RISE, Research Institutes
of Sweden AB
Depending on the distance from the UV curing
device, the limit value according to AFS 2009:7
index b. (UVA eye) for one working day (8 h)
is reached after one or a few minutes at close
distances (~0.5 m). At longer distances than about
4 m, the acceptable exposure time is an hour or
more.
To reduce risk of injury or property damage from
UV radiation, read, understand, and follow the
following safety instructions. In addition, make
certain that anyone else that uses this curing
equipment follows these safety instructions as well.
• Always wear eye protection. Failure to this may
result in long term injury to the eyes.
• Wear protective clothing. Hands, face and
other parts of the body shall not be exposed
to heat and radiation. Do not stay in front of
the lamp cassettes during curing without safety
equipment.
• If a person works around UV radiation while
on medications, the medication should be
checked to see if it would make the person more
photosensitive.
• Do not look directly at the light source.
• Professional commercial indoor use in a
dedicated, isolated, or restricted area, accessed
only by qualified professional operators.
• These products are intended only for use
in a restricted access area, or an area which
incorporates suitable site protection to
prevent unintended exposure of untrained or
SAVE THESE INSTRUCTIONS
2 2
unqualified persons to ultraviolet radiation. It is
the responsibility of the designated parties at
the final installation site to confirm that proper
installation, training, and control means have
been implemented.
WARNING!
GROUNDING INSTRUCTIONS
This equipment must be grounded. If it should
malfunction or breakdown, grounding provides
a path of least resistance for electric current to
reduce risk of shock. This equipment is equipped
with a cord having an equipment grounding
conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly
installed and grounded in accordance wiith all local
codes and ordinances.
WARNING
Improper connection of the equipment-grounding
conductor is able to result in a risk of shock. Check
with a qualified electrician or serviceman if you are
in doubt as to whether the equipment is properly
grounded. Do not modify the plug provided with
the equipment. If it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
EN
715423 rev 2