Operating Overview; Language Selection - JUMO miroVIEW Kurzanleitung

6 Operation
5 Down (in the menu: reduce value, select
next menu item or parameter)
7 Timer (illuminated = on, flashing = started),
Temperature Unit
6.1.1

Operating overview

Button functions
Button or button com-
bination (permanent)
Up
Down
Back short (< 3 s)
Back long (> 3 s)
Menu/OK short (< 3 s)
Up + Down long (> 3 s)
Down + Menu/OK
very long (> 5 s)
6.2

Language selection

After switching on the device for the first time, the user can either confirm the flashing displayed lan-
guage with "OK" or select another language using the "Up"/"Down" buttons and then confirm this with
"OK".
After applying a language, the device automatically sets this parameter to "OFF", meaning that language
selection is not necessary the next time the device is switched on.
22
In basic status
---
---
Function configurable
(default setting:
no function)
Function configurable
(default setting: without
function)
Call up main menu
---
+
Call up menu for level in-
hibit
+
6 Up (in the menu: increase value, select pre-
vious menu item or parameter)
8 Switch position of the digital outputs (yellow
= active)
Function
When navigating
Select previous menu
item or parameter
Select next menu item
or parameter
Move to menu level
above
---
Call up sub-menu or
switch to editing mode
---
---
When editing
Increase value or go up
in picklist
Decrease value or go
down in picklist
Leave editing mode
without changes
---
Leave editing mode with
changes
---
---