Use And Maintenance; Up, Down, My; Additional Settings - SOMFY Tilt Only 50 RTS Central Pack Anleitung

EN

3. USE AND MAINTENANCE

͉
This drive is maintenance-free

3.1. UP, DOWN, MY

1) To move the motorised product from one end
limit to the other, briefly press the Up or Down
button (less than 0.5 s).
2) Press my to stop the motorised product.
3) If a my position is programmed: to
move the motorised product to the my
position, briefly press the my button.
The motorised product will first move to its
lower end limit then to the my position.
4) To tilt the slats, press and hold the Up or Down
button or use the jogwheel on the remote
control, until the slats reach the desired position.

3.2. ADDITIONAL SETTINGS

3.2.1. Programming or modifying the favourite position
(my)
1) Place the motorised product in the desired
favourite position (my).
2) Press the my button until the motorised
product moves up and down: the favourite (my)
position is programmed and the green LED
flashes five times.
͉
To program a favourite slat position in Venetian
blind mode (default mode), move the motorised
product to the lower end limit then set the desired orientation by pressing the
Up button.
26 Copyright 2021 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
Tilt Only 50 RTS Central Pack
1 1
2 2
3 3
4 4
1 1
2 2