Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
W
arning
• When stored over a long period of time, batteries
should be charged regularly (at least every three
months).
• Only charge the batteries at temperatures between
10°C - 40°C.
N
ote
The USB cable included in the box is only suitable to
charge this product. It´s not suitable for data transfer
or charging of other USB devices.
• Charge the battery of the Bluetooth
before using it for the first time.
• Begin charging the Bluetooth
connecting the included Micro-USB charging cable to
the Micro-USB socket of the keyboard (7) and to the
USB connection of a PC/notebook.
• Alternatively, you can charge the Bluetooth
using a suitable USB charger. Please refer to the
operating instructions for the USB charger used.
• The charge indicator status LED (5) will be lit red
during active charging. If the battery is fully charged,
the charge indicator status LED (5) will go out.
• If the battery capacity is low, the power status LED (6)
will begin to flash blue during operation. In this case,
charge the battery of the Bluetooth
described above.
N
ote – Stand function
For optimal handling, fasten your device in the tablet
case and use the integrated stand function.
• To do this, fold back the flap of the tablet case and
attach it using the magnet (C).
• Carefully fasten your tablet PC to the holder using
the rubber straps. Choose the appropriate straps for
holding your tablet PC securely in place.
• To remove the tablet PC, carefully pull off each of the
straps from the corners of your tablet PC.
6. Operation
N
ote
• The functions described in this section are only
available for Bluetooth
• Note that the maximum range for Bluetooth
metres without obstacles such as walls, people, etc.
keyboard fully
®
keyboard by
®
keyboard
®
keyboard as
®
-capable terminal devices.
®
®
6.1 Bluetooth
N
ote – Pairing
• Make sure that your Bluetooth
device is on and Bluetooth
• Make sure that your Bluetooth
device is visible for other Bluetooth
• For more information, please refer to the operating
instructions of your terminal device.
• Slide the OFF/ON switch (2) to the ON position to
switch on the Bluetooth
LED (6) lights up.
• Press and hold the Connect button (1) until the
Bluetooth
blue. The keyboard is searching for a Bluetooth
connection.
• Open the Bluetooth
and wait until Hama KEY4ALL X3100 appears in the
list of Bluetooth
• Select Hama KEY4ALL X3100 and enter the numeric
code specified on your device using the Bluetooth
keyboard. Press the Enter key to confirm and wait until
the keyboard is shown as connected in the Bluetooth
settings on your terminal device. The Bluetooth
status LED (4) goes out.
• You can now use the Bluetooth
6.2 Automatic Bluetooth
successful pairing)
N
ote
• Make sure that your Bluetooth
device is on and Bluetooth
• Make sure that your Bluetooth
device is visible for other Bluetooth
• For more information, please refer to the operating
instructions of your terminal device.
• Slide the OFF/ON switch (2) to the ON position to
switch on the Bluetooth
LED (6) lights up.
• Press and hold the Connect button (1) until the
Bluetooth
blue. The keyboard is searching for a Bluetooth
connection.
is 10
pairing
®
®
is activated.
®
®
keyboard. The power status
®
status LED (4) begins to continually flash
®
settings on your terminal device
®
devices found.
®
®
connection (after
®
®
is activated.
®
®
keyboard. The power status
®
status LED (4) begins to continually flash
®
-capable terminal
-capable terminal
devices.
®
®
®
®
®
keyboard.
-capable terminal
-capable terminal
devices.
®
®
3
Werbung
Inhaltsverzeichnis
