Herunterladen Inhalt Inhalt Diese Seite drucken

Bluetooth ® Pairing - Hama KEY4ALL X510 Bedienungsanleitung

Bluetooth-tastatur
Vorschau ausblenden Andere Handbücher für KEY4ALL X510:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5. Getting Started
Warning – Batteries
• When inserting batteries, note the correct
polarity (+ and - markings) and insert the
batteries accordingly. Failure to do so could
result in the batteries leaking or exploding.
• Only use batteries (or rechargeable batteries)
that match the specified type.
• Before you insert the batteries, clean the battery
contacts and the polar contacts.
• Do not allow children to change batteries
without supervision.
• Do not mix old and new batteries or batteries of
a different type or make.
• Remove the batteries from products that are not
being used for an extended period (unless these
are being kept ready for an emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or
allow them to enter the environment. They can
contain toxic, environmentally harmful heavy
metals.
• Immediately remove and dispose of dead
batteries from the product.
• Avoid storing, charging or using the device
in extreme temperatures and extremely low
atmospheric pressure (for example, at high
altitudes).
• Open the battery compartment (4), insert two AAA
batteries with the correct polarity and close the
battery compartment (4).
• If the battery charge is low, the Bluetooth/battery
status LED (1) will begin to flash blue during
operation. Replace the batteries immediately as
described above.
6. Operation
Note
• The functions described in this section are
only available for Bluetooth-capable terminal
devices.
• Note that the maximum range for Bluetooth
is 10 metres without obstacles such as walls,
people, etc.
6.1 Bluetooth
pairing
®
Note – Pairing
• Make sure that your Bluetooth
terminal device is on and Bluetooth
activated.
• Make sure that your Bluetooth
terminal device is visible for other Bluetooth
devices.
• For more information, please refer to the
operating instructions of your terminal device.
• Slide the [OFF/ON] switch (2) to the ON position
to switch on the Bluetooth
• Press the FN + C keys and keep them pressed
until the Bluetooth
charge status LED (1) begins to continually flash
blue. The keyboard is searching for a Bluetooth
connection.
• Open the Bluetooth
device and wait until Hama KEY4ALL X510
appears in the list of Bluetooth
-capable
®
is
®
-capable
®
keyboard.
®
connection / battery
®
settings on your terminal
®
devices found.
®
®
3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

0010839200108393

Inhaltsverzeichnis