Bluetooth ® Pairing; Multimedia Keys - Hama KEY4ALL X510 Bedienungsanleitung

Warning – Batteries
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or
allow them to enter the environment. They
can contain toxic, environmentally harmful
heavy metals.
• Immediately remove and dispose of dead
batteries from the product.
• Avoid storing, charging or using the device
in extreme temperatures and extremely low
atmospheric pressure (for example, at high
altitudes).
• Open the battery compartment (4), insert two AAA
batteries with the correct polarity and close the
battery compartment (4).
• If the battery charge is low, the Bluetooth/battery
status LED (1) will begin to flash red during
operation. Replace the batteries immediately as
described above.
6. Operation
Note
• The functions described in this section are
only available for Bluetooth-capable terminal
devices.
• Note that the maximum range for Bluetooth
is 10 metres without obstacles such as walls,
people, etc.
6.1 Bluetooth pairing
®
Note – Pairing
• Make sure that your Bluetooth
terminal device is on and Bluetooth
activated.
• Make sure that your Bluetooth
terminal device is visible for other Bluetooth
devices.
• For more information, please refer to the
operating instructions of your terminal device.
• Slide the [OFF/ON] switch (2) to the ON position to
switch on the Bluetooth® keyboard.
• Press and hold the [CONNECT] button (3) until
the Bluetooth /battery status LED (1) begins to
®
continually flash red. The keyboard is searching for
a Bluetooth connection.
®
• Open the Bluetooth
device and wait until Hama KEY4ALL appears in
the list of Bluetooth
-capable
®
is
®
-capable
®
settings on your terminal
®
devices found.
®
• Select Hama KEY4ALL, follow any instructions on
your terminal device, and wait until the keyboard
is shown as connected in the Bluetooth
on your terminal device. The Bluetooth
status LED (1) goes out.
• You can now use the Bluetooth
6.2 Automatic Bluetooth
successful pairing)
Note
• Make sure that your Bluetooth
device is on and Bluetooth
• Make sure that your Bluetooth
device is visible for other Bluetooth
• For more information, please refer to the operating
instructions of your terminal device.
• Slide the [OFF/ON] switch (2) to the ON position
to switch on the Bluetooth
Bluetooth
• You can now use the Bluetooth
Note
After the devices have been paired once, the
connection is then established automatically.
If the Bluetooth
automatically, check the following:
• Check the Bluetooth
device to see whether Hama KEY4ALL is
connected. If not, repeat the steps listed under
6.1 Bluetooth
• Check whether obstacles are impairing the
range. If so, move the devices closer together.
6.3 Changing the operating system
The Hama KEY4ALL X510 keyboard supports
three different operating systems. You can use
the following shortcut keys to select the desired
®
operating system:
• fn + Q for Apple iOS
• fn + W for Android
• fn + E for Windows

6.4 Multimedia keys

The multimedia keys give you direct access to various
applications and functions.
You can use them by pressing fn + the required
multimedia key.
®
connection (after
®
®
is activated.
®
®
keyboard. The
®
/battery status LED (1) flashes red.
®
®
connection is not established
®
settings of your terminal
®
pairing.
®
settings
®
/battery
®
keyboard.
-capable terminal
-capable terminal
devices.
®
keyboard.
3