Wahl 4480 Gebrauchsanweisung Seite 10

E N G L I S H
Operation
Preparation
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Safety
Caution! Damage due to incorrect power supply.
de
f Only operate the hair straightener with the volt-
age stated on the nameplate.
en
Operation
fr
1. Insert the mains plug into the socket.
2. Switch on the hair straightener (Fig. 2ⓐ) using the on/
it
off switch. The LED display is red. Operating temperature is
es reached within a very short time.
3. After using the hair straightener, switch it off using the on/
pt
off switch (Fig. 2ⓑ). The LED display goes out.
4. Disconnect from the mains.
nl
5. Allow the hair straightener to cool down.
da
Operation
sv
Tips for successful styling
1. Wash and rinse the hair well.
no
2. Dry the hair.
fi
3. Brush or comb the hair.
4. Section off individual strands of hair.
tr
5. At the hairline, place a section of hair between the heat-
ing plates.
pl
6. Keep the hair straightener pressed together and slowly pull
it down the section of hair and away from the head.
cs
f Do not leave the sections of hair in the hair
sk
straightener for more than a few seconds, other-
wise this could damage the hair.
hr
7. Open the hair straightener and allow the section of hair
hu
to slip out.
8. Repeat this process until the desired result has been
sl
achieved.
ro
CERAMIC- & TOURMALINE-coated heating plates
bg
Negative ions have an antistatic effect and are gentle to the
hair. They close the scale layer, creating a smooth, silky hair
ru
surface. They lock in the natural moisture of the hair, thereby
creating the ultimate shine.
uk
et
lv
lt
el
10
ar
Maintenance
Warning! Injuries and material damage due to
incorrect handling.
f Switch off the hair straightener before cleaning it
or performing any maintenance. Disconnect the
hair straightener from the power supply.
f Allow the hair straightener to cool down
completely.
Cleaning and care
Danger! Electric shock due to penetration of
liquid.
f Do not immerse the hair straightener in water!
f Do not allow any liquid to get inside the
appliance.
Caution! Danger from aggressive chemicals.
Aggressive chemicals could damage the hair straight-
ener and accessories.
f Never use solvents or scouring agents.
f Only wipe the hair straightener with a soft cloth, which
may be dampened slightly.
Problem elimination
Hair straightener does not heat up.
Cause: Defective power supply.
f Make sure that contact between the mains and the socket
is faultless. Check the mains cable for possible damage.
In the event that this information does not help you resolve
your problem, please contact our service centre. Never attempt
to repair the appliance yourself!