Troubleshooting; Service Data - AEG BPS33102ZM Benutzerinformation

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
13.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
The oven does not turn on or does not heat
up
Problem
You cannot activate or
operate the oven.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
Components
Problem
The lamp is turned off.
The lamp does not work.
Error codes
The display shows...

13.2 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Check if...
The oven is correctly
connected to an electrical
supply.
The automatic switch-off
is deactivated.
The oven door is closed.
The fuse is blown.
The Child Lock is off.
Check if...
Moist Fan Baking - is
turned on.
The lamp is burnt out.
Check if...
Error codes
C3
F102
F102
12:00
If the display shows an error code that is not in this
table turn the house fuse off and on to restart the
oven. If the error code recurs contact an Authorised
Service Centre.
Other problems
Problem
The appliance is activa‐
ted and does not heat up.
The fan does not oper‐
ate. The display shows
"Demo".
.........................................
.........................................
The oven door is closed
or the door lock is not
broken.
The oven door is closed.
The door lock is not bro‐
ken.
There was a power cut.
Set the time of day.
Check if...
The Demo Mode is deac‐
tivated:
1. Turn off the oven.
2. - press and hold.
3. The first digit on the
display and Demo
flash.
4. / - press to
enter the code:
2468. Press: .
The next digit flash‐
es.
ENGLISH 23