AEG BPS33102ZM Benutzerinformation Seite 22

Step 8 Clean the glass panels with water and soap. Dry the glass panels carefully. Do not clean the glass
Step 9
If the door is installed correctly, you will hear a click when closing the latches.
Make sure that you put the glass panels (A and B)
back in the correct sequence. Check for the symbol /
printing on the side of the glass panel, each of the
glass panels looks different to make the disassembly
and assembly easier.
When installed correctly the door trim clicks.
Make sure that you install the middle panel of glass in
the seats correctly.
12.6 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.
22 ENGLISH
panels in the dishwasher.
After cleaning, install the glass panels and the oven door.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
A B
Always hold the halogen lamp with a cloth to
prevent grease residue from burning on the
lamp.
Put a cloth on the bottom of the cav‐
A
B
Step 3
ity.