Clock Functions - AEG BPS33102ZM Benutzerinformation

refer to "Energy Efficiency" chapter, Energy
Saving.

8. CLOCK FUNCTIONS

8.1 Clock functions table
Clock function
Time of Day
Duration
End Time
Time Delay
Minute Minder
00:00
Count Up Timer
8.2 How to set: Time of day
After the first connection to the mains, wait
until the display shows: hr, 12:00. 12 -
flashes.
Step 1
, - press to set the hour.
Step 2
- press to confirm.
The display shows the set hour and: min. 00 - flashes.
Step 3
, - press to set the minutes.
Step 4
- press to confirm.
The display shows the set time.
- press repeatedly to change the time of day.
12 ENGLISH
Application
To show or change the time of day. You can change the time of day
only when the oven is off.
To set the length of cooking. Use only when a heating function is set.
To set the oven turn-off time. Use only when a heating function is set.
Combination of functions: Duration, End Time.
To set a countdown time. This function has no effect on the operation
of the oven.
Minute Minder - can be set at any time, also if the oven is off.
If you do not set any other clock function the function automatically
monitors how long the oven works.
Counting starts immediately when the oven starts to heat.
Count Up Timer cannot be used with the functions: Duration, End
Time.
- flashes in the display.