TFA 30.3048 Bedienungsanleitung Seite 8

TFA_No_30.3048_Anleitung_03_23
Wireless thermometer
• Batteries contain harmful acids and may be hazardous if swal-
lowed. If a battery is swallowed, this can lead to serious internal
burns and death within two hours. If you suspect a battery
could have been swallowed or otherwise caught in the body,
seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken
apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent
damage caused by leaking.
• Never use a combination of old and new batteries together, nor
batteries of different types.
• Avoid contact with skin, eyes and mucous membranes when
handling leaking batteries. In case of contact, immediately rinse
the affected areas with water and consult a doctor.
Important information on product safety!
• Do not expose your device to extreme temperatures, vibrations
or shocks.
• Protect it from moisture.
• The outdoor transmitter is protected against splash water, but is
not watertight. Choose a shady and dry position for the trans-
mitter.
5. Elements
5.1 Base station (Fig. 1):
A: Display for indoor and outdoor
A 1: Indoor and outdoor temperature
A 2: MAX/MIN values
B: Buttons:
Button front:
B 1: SEARCH button
Buttons backside:
▲ button
B 2:
B 3: RESET button
▼ /°C/°F button
B 4:
B 5: ALERT button
14
21.02.2023 15:11 Uhr Seite 8
Wireless thermometer
C: Housing:
C 1: Wall mount hole
C 2: Battery compartment
C 3: Stand (fold out)
5.2 Outdoor transmitter (Fig. 2):
D 1: Transmission signal lamp
Button inside the battery compartment
D 2: RESET button
Housing:
D 3: Wall mount hole
D 4: Battery compartment
D 5: Stand (fold out)
6. Getting started
Insert batteries:
• Place both instruments on a desk with a distance of approxi-
mately 1.5 meter. Check that no other electronic devices are
close.
• Open the battery compartment of the transmitter by pulling the
battery compartment cover downwards (see marking) and lift up
the cover.
• Insert two new batteries 1,5 V AAA, ensure battery polarities are
correct.
• Close the battery compartment again.
• Open the battery compartment of the base station and insert two
new batteries 1,5 V AAA, ensure battery polarities are correct.
• A brief beep tone will sound and all LCD segments will light up
for a short moment.
• Close the battery compartment again.
Reception of the outdoor temperature
• After the batteries are inserted the outdoor temperature will
automatically be transmitted to the base station.
• The reception signal - symbol flashes. The base station will scan
for 3 minutes the outdoor temperature.
15