Overview Of Basic Settings; Cleaning And Servicing - Siemens EQ300 TF30-Serie Gebrauchsanleitung

Confirm with "ok" button
5.
a The display shows "Settings
saved".
Press "<" button
6.
the menu.
10.2 Overview of basic settings
You can find an overview of the basic settings here.
Setting
Language
Factory reset
W. hardness
Auto Stand-by
Sound
11 Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important to
clean and maintain it carefully.
⁠ .
to exit
Selection
See selection on the ap-
pliance
Select the required lan-
guage.
¡ "W. hardness" 1, 2, 3,
4
¡ Water filter
¡ H2O-Softener
See selection on the ap-
pliance
¡ Sound on
¡ Sound off
Cleaning and servicing en
Note: If you do not press any other
button within 90 seconds, the appli-
ance switches to the select beverage
setting without saving.
Tip: You can change the settings at
any time.
→ "Basic settings", Page 48
Description
Set menu language.
Changes are immedi-
ately displayed.
Restore settings to the
factory settings.
Note: The appliance
rinses and deletes all in-
dividual settings.
Set the appliance to the
local water hardness.
Tip: Ask your local water
supplier about the water
hardness.
Note: If a water softening
system is installed in
your house, select "H2O-
Softener".
Set how long the appli-
ance should wait after
preparing the last bever-
age before automatically
switching itself off.
Switch the tones on or
off.
49