Seatpost Assembly & Installation - Cervelo S3 DISC Betriebsanleitung

SEATPOST ASSEMBLY & INSTALLATION
15
1. Apply a light coat of carbon
assembly compound to the
upper face of the Seatpost,
making sure to cover area
around the adjustment slots.
2. Locate saddle rail between
upper and lower clamps, and
place on Seatpost.
3. With alignment washers
installed, attach assembly
to Seatpost, by tightening
lightly greased fixing bolts,
alternating between the two
sides each 1/2 turn. Once
saddle is adjusted, tighten
fixing bolts to 8-9 Nm.
1. Apply carbon paste to frame
and insert Seatpost Clamp.
2. Adjust height and torque to
8 Nm maximum.