Safety Regulations; Layout And Items Supplied; Proper Use - EINHELL TC-PN 50 Originalbetriebsanleitung

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Protect yourself and your environment from risks
and accidents by taking the appropriate precauti-
onary measures.
Residual risks
Even if you use the equipment in accordance with
the instructions, certain residual risks cannot be
eliminated. The following hazards may arise in
connection with the equipment's construction and
layout:
1. Risk of pinching
2. Risk of injury from staples.

2. Layout and items supplied

2.1 Layout (Fig. 1/8)
A Trigger lever
B Compressed air connection
C Magazine lever
D Magazine cover
E Magazine
F Level indicator
G Depth setting
H Trigger catch
I Cover plate (external)
J Cover plate (internal)
K Swivel air-outlet
Anl_TC_PN_50_SPK9.indb 15
https://tm.by
Интернет-магазин TM.by
GB
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Oil bottle (without oil)
•
Hexagon key 3 mm
•
Hexagon key 4 mm
•
Nipple
•
500 staples in each of the following sizes: 16
mm, 25 mm, 40 mm
•
1000 nails in each of the following sizes: 25
mm, 40 mm
•
Air stapler
•
Original operating instructions
•
Safety information

3. Proper use

The stapler is a pneumatically operated tool desi-
gned for versatile use.
This equipment is designed for driving fi nishing
nails and staples into wood and similar materials.
Only use the types of nails/staples described in
the "Technical data" section or illustrated on the
information sign on the magazine. Never use any
other nails/staples. Never use on hard surfaces
such as stone, metal, etc., either.
- 15 -
06.03.2019 10:14:20