LED IP ATMO BLINDER 9
DANGER! Electric shock caused by short-circuit
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires. Never open the housing.
Please read these instructions carefully before using the product. They contain important
information for the correct use of the product.
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet
INTRODUCTION
Thank you for having chosen one of our products. If you follow the instructions given in this manual, we are
sure that you will enjoy this device for a long period of time.
Product features
Weather-proof blinder with pixel control and atmo cluster
Each of the 9 COB blinder LEDs is surrounded by 2 RGB segments for atmospheric light
•
One RGB LED segment is directed towards the front, one towards the reflector
•
Each COB LED, as well as each RGB LED segment, can be controlled individually
•
Adjustable white balance
•
Electronic dimmer (0-100%)
•
Various dimmer curves with adjustable response
•
Stepless RGB color blend, color change, color fade, dimmer and strobe effects
•
Mains input and output for power linking up to 4 units
•
9 powerful LEDs 24 W COB (chip-on-board) CW/WW (homogenous color mix)
•
360 powerful LEDs 0.2 W SMD 3528 3in1 TCL RGB (homogenous color mix)
•
Variable color temperature 1800 K - 6000 K
•
20 integrated showprograms
•
Can be operated in 13; 18; 72; 85 CH mode
•
The device is cooled by low-noise cooling fan
•
Controlling by stand-alone; DMX; ArtNet; RDM; Master/slave function
•
Flicker-free
•
With a beam angle of 20°
•
Multicolor LCD display
•
USER MANUAL
22/40
00146662, Version 1.0