Suntec Wellness KLIMATRONIC COOLMASTER 2.0 Eco R290 APP Bedienungsanleitung Seite 20

The device
operates at
reduced power
Water is leaking.
Excessive noise.
Error Codes
Spare parts and accessories supply (fast convenient supply)
You can obtain spare parts and accessories for your COOLMASTER unit from your local dealer. And at
our website
you will find further information on individual accessory products as well as information on obtaining
our spare parts quickly and conveniently. You will also find other information (e.g. FAQ, lists of spare
parts, document download, etc) on your COOLMASTER unit.
Name EAN
Air-Block Klima-Sail 450 XXL
4250058312099
Air-Extension-Kit
4250058312105
Check the air filter for dirt.
Check whether the air outlet is
blocked.
Check whether the door or
window of the room is open.
Check if the desired mode is
selected and that the
temperature is set correctly.
The exhaust hose is
disconnected.
Overflow when moving the
unit.
Check whether the drain hose
is bent or kinked.
Check that the unit is securely
positioned.
Check for loose, vibrating
parts.
Noise sounds like water
flowing.
Circuit temperature sensor
E1
failure.
Indoor temperature sensor
E2
error
E4 Automatic frost protection
FL
Water tank full.
www.suntec-wellness.de
Description
Sail which can be used
for all types
windows and doors.
As for an external fly
screen, it is fixed with
Velcro and operated
via a zip. The window
or door can be closed
at any time.
A World First with
which you can air-
condition almost every
corner of your house,
and it doesn't matter
where the local air
conditioner is located.
You can extend the
extract air hose by 5
meters via a special
propeller.
Please clean the air filter if
necessary.
Remove the blockage.
Keep the doors and windows
closed.
Set the mode and temperature
to the correct setpoint according
to the instructions.
Please make sure that the
exhaust hose is not stuck.
Please empty the water tank
before transport.
Please align the hose to avoid
the presence of an obstacle.
Please place the unit on a level
and solid floor.
Secure and tighten the parts.
Noise is caused by the flowing
refrigerant. This is normal.
Please contact your sales
representative.
Please contact your sales
representative.
The appliance is in an ambient
temperature that is too cold. As
soon as the sensors detect 8°C
again, the appliance can
continue to operate normally.
Please empty the water tank by
removing the rubber plug.
of
Drawing