Other Models - fischertechnik PROFI Dynamic XL Begleitheft

GB+USA
Obstacle - small jump
Obstacle - jump loop
Tip:
See wheel conveyor.
Tip:
Mark the two balls with different
colors.

Other Models

Your own Dynamic XL
obstacle course
Combination obstacle
course
P D
r o f i y n a m i c
This obstacle is installed only in this model. The balls come directly from
the stage conveyor and roll toward the small jump. After arriving here,
the balls lift off slightly if you watch closely. They then continue to roll
downward on the next flex-rail installed at an angle.
As with the wheel conveyor model, a jump loop is also present here.
Task:
Observe two balls as they are picked up by the wheel conveyor one after
another. Check whether the balls arrive at the wheel conveyor again in the
same order, or if the first ball is repeated.
Task:
Again take two balls. It is best to mark one, to keep from mixing them up. Let one ball
start rolling down on each side of the stage conveyor. Measure the time required
for each ball to arrive at the entrance to the stage conveyor. Which side is faster?
Now it's your turn to be creative. Develop your own obstacle course with fantastic new designs and other
exciting obstacles. You can also try to develop completely new conveying techniques to move your balls
to the top.
Maybe you are already the proud owner of an ADVANCED Rolling Action and/or PROFI Dynamic construction
set. If so, you can design even larger elevators and, above all, longer tracks, in combination with the parts
from these construction sets. Moreover you can think up new, tricky obstacles and effects for your balls
to run through on their way down.
Our Internet site at www.fischertechnik.de/home/downloads/dynamic.aspx also provides instructions for
constructing an even larger combination Dynamic and Dynamic XL model.
20
X L a B
c t i v i t y o o k L e t