What Does Dynamics Mean; Elevator/Conveying Equipment; Dynamic Xl Parts; Flex-Rails - fischertechnik PROFI Dynamic XL Begleitheft

GB+USA
What does
dynamics mean?
Elevator/Conveying
Equipment

Dynamic XL Parts

Flex-rails

Tip:
If the rails are bent after disassembly,
they can be straightened by clamping
them on the base plate for a while.
This reduces the bending.

Cross-over

Catch funnel

90° curve

Rainbow LED

P D
r o f i y n a m i c
■ We are continuously surrounded by dynamic action. You are even part of dynamic action yourself -
regardless of whether you are running, swimming or jumping. As soon as something moves - it is dynamic.
Dynamic action means motion upward, downward or to the side. Downward motion is automatic due to
the force of gravity. Upward motion requires something like an elevator to overcome the force of gravity.
The PROFI Dynamic XL construction set will allow you to learn a great deal about how balls can be moved
upward in different ways. There are different methods for overcoming the force of gravity, from chain
conveyors to wheel conveyors and spring launchers.
Naturally with Dynamic XL we don't loose out on the fun going down either. The balls race downward on
flex-rails through various obstacles and obstructions such as a stopping point, a cross-over or jump. The
balls are continuously transported back up by elevators.
The balls race down the obstacle course on rails. The flex-rails are flexible in all
directions. When building an obstacle course you can be as creative as you like
and build special, crazy curves, loops and jumps.
The cross-over is a new component. A lever is attached in the middle of the
cross-over to guide the balls alternately to the flex-rail attached on the right
or left.
This component is used as a catch funnel on various models. For this purpose
it is necessary to remove the lever from the cross-over. The wide shape with
higher side walls ensures that the balls are caught properly after passing over
the jump.
The 90° curve is an additional, new component in the PROFI Dynamic XL construction
set. It allows you to change direction quickly and build tight curves simply.
LED's convert the electrical power to light. An LED consists of various semi-conductor materials. The
white part of the Rainbow LED has a control chip connected to three light units (red, green and blue).
These colors can be mixed to produce other colors. For example mixing green and red produces yellow.
The control chip regulates the electrical current. This allows you to adjust the colors to make them light
or dark. Actuating the light units one after another from dark to light with a time overlap produces a
rainbow and flashing effect. Ensure that you connect the Rainbow LED as shown in the circuit diagram in
the assembly instructions. The positive pole is marked red.
12
X L a B
c t i v i t y o o k L e t