Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.
Place the device in front of the installation slot so that the wiring can be brought
through the mounting frame. Follow the wiring diagram carefully and make cer-
tain that all connections are well insulated.
6.
We recommend to install the distance bolt to protect the connections of the de-
vice. Please screw the distance bold in the back side of the device and attach
the rubber cap.
7.
Push the device into the mounting frame until the device is locked.
8.
Please connect the car battery after correct wiring of the device. Turn the device
on to check operation (vehicle ignition must be on). If the device does not oper-
ate, re-check the wiring until the problem is corrected.
Fig. 29: Device installation
12.4
Removing the device
Remove the front panel of the device. Then remove the trim plate. Insert the removal tools
straight back until they lock in. After that pull the device out and unplug the cables.
Fig. 30: Removing the device
13
Anti-theft system
This device is designed with a detachable front panel. The front panel can be detached to
avoid theft.
Manual KR-737+ radio navigation system
35
EN
Werbung
Inhaltsverzeichnis
