Miele PWM 912 Programmübersicht Seite 121

The Mops rtu programme is suitable for the subsequent finishing of clean and dry mops.
A disinfecting agent is applied during finishing.
The dispensing quantities must be set on site and the standard of disinfection must be
checked.
Mop load size (cotton) applies to the load ratio 1:9
Mop size/ 40 cm
weight 190 g/
mop
PWM 912 Qty. 63
PWM 916 Qty. 84
PWM 920 Qty. 105
Tip: When using microfibre mops, the load size is higher due to the lower mop weight.
Mop load size (microfibre) applies to the load ratio 1:9
Mop size/weight
PWM 912
PWM 916
PWM 920
A reduced number may apply to particularly high-volume, light-weight mops.
50 cm 60 cm
220 g/ 280 g/
mop mop
Qty. 55 Qty. 43
Qty. 73 Qty. 57
Qty. 91 Qty. 71
40 cm
120 g/mop
Qty. 100
Qty. 133
Qty. 167
en - Programme summary
80 cm 110 cm
360 g/ 510 g/
mop mop
Qty. 33 Qty. 24
Qty. 44 Qty. 31
Qty. 56 Qty. 39
130 cm 160 cm
610 g/ 720 g/
mop mop
Qty. 20 Qty. 17
Qty. 26 Qty. 22
Qty. 33 Qty. 28
50 cm
170 g/mop
Qty. 71
Qty. 94
Qty. 118
121