Chemical Protective Suits Programmes - Miele PWM 912 Programmübersicht

en - Programme summary

Chemical protective suits programmes

Chemical prot. suits is a programme for washing chemical protective clothing of fire bri-
gades.
A chemo-thermal disinfection (60 °C/20 min) is carried out, for which suitable detergents
are to be used.
Chemical prot. suits
Fabric
Programme se-
quence
Extras
Chemical prot suits special
Fabric
Programme se-
quence
Extras
Observe the recommendation of the protective suit manufacturer regarding maximum

wash temperature.
In the case of unknown contamination, check the type of contamination before washing,

because decontamination is not guaranteed in every case.
To remove external contamination, close the suits before using the "Chemical prot suits

special" programme. For internal and external disinfection with the "Chemical prot. suits"
programme, open the suits. To protect the visor, fold the hood inwards and place the leg
part over it.
Observe the minimum load of the washing machine so that the suits do not spread apart

and damage the visors. Or prevent the unfolding of the suits by washing in a suitably
large washing net.
130
60 °C
Chemical protective suits made from multi-
layered laminated fabrics
Disinfection 60 °C, holding time 20 min
3 rinse cycles (optional disinfection rinse can be
activated), drainage
Soak, Intensive, Rinse plus
40 °C
Chemical protective suits made from multi-
layered laminated fabrics
Main wash 40 °C, wash time 8 min
1 rinse cycle, drainage
Soak, Intensive
Load ratio/Load
size
PWM 912 –
1 suit
PWM 916 –
1 suit
PWM 920 –
2 suits