Duravit SensoWash Classic Bedienungsanleitung Seite 35

>The product itself does not have an electrical leakage protection
function, it must be installed in a power circuit where a leakage
protection device is installed.
>Means for disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules and having a contact separa-
tion in all poles that provide full disconnection under overvoltage
category III conditions.
Avoid damage to the power cable
If the power supply cable on this product is damaged, it must be
replaced by the manufacturer, the customer service agent or simil-
arly qualified persons in order to avoid a hazard.
>Ensure that the power cable is NOT damaged.
>The power cable must NOT become jammed or pinched.
>Keep the power cable away from hot surfaces and sharp edges.
Do NOT use a damaged product
Do NOT use the product if the product does not function properly or
is damaged.
>Switch off the product.
>Disconnect the power supply.
>Close the stop valve to interrupt the water supply.
>Contact help@duravit.com.
>Do NOT damage the seat surface. If the surface is damaged,
contact the Duravit customer service hotline.
Do NOT repair the product yourself
Repairs must only be carried out by persons with the necessary
expertise and qualification.
>Do NOT make modifications, tamper with, install additional equip-
ment or attempt to repair the product.
>Only use accessories recommended by Duravit.
35