Specifications - Makita BFL080F Betriebsanleitung

ENGLISH
(Original instructions)
1 Battery cartridge
2 Indicating lamp
3 Capacity
4 Switch trigger
5 Reversing switch lever
6 Light
7 LED indicator
8 Angle head
9 Adjusting ring

SPECIFICATIONS

Model
Hard joint
Fastening
torque
Soft joint
Square drive
No load speed
-1
(min )
Dimensions
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
Explanation of general view
10 Ring
11 Scale
12 Adjusting grip
13 Hole for Adjusting grip
14 Edge of Adjusting ring
15 Compression spring
16 Socket
17 Hole
18 Pin
BFL060F BFL080F
1.5 – 6 N•m 2 – 8 N•m
1.5 – 6 N•m 2 – 7.5 N•m
9.5 mm 9.5 mm
450 450
430 x 65 x 74 mm
(With Battery Cartridge BH9020A)
454 x 65 x 74 mm
(With Battery Cartridge BH9033A)
1.5 kg
D.C. 9.6 V
ENE033-1
GEA010-1
19 Screw bit
20 Sleeve
21 Range of fastening capacity
22 Revolution angle (°)
23 Torque (N•m)
24 Limit mark
25 Screwdriver
26 Brush holder cap
BFL120F BFL081F
5 – 12 N•m 2 – 8 N•m
5 – 12 N•m 2 – 7.5 N•m
9.5 mm 9.5 mm
250 700
(With Battery Cartridge BH1220)
(With Battery Cartridge BH1220C)
(With Battery Cartridge BH1233)
(With Battery Cartridge BH1233C)
CORDLESS SCREWDRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
BFL121F BFL200F
5 – 12 N•m 8 – 20 N•m
5 – 11.5 N•m 8 – 18 N•m
9.5 mm 9.5 mm
410 220
430 x 71 x 92 mm
413 x 74 x 92 mm
454 x 71 x 92 mm
421 x 74 x 107 mm
1.6 kg
D.C. 12 V
GEB050-2
5