Steam Ironing - Taurus EASY TRIP VER III Gebrauchsanleitung

Downloaded by: pd-oliana on 31-03-2023 13:37 CEST
FILLING WITH WATER:
It is essential to have filled the deposit with
water to be able to work with steam.
Open water inlet lid.
Fill the deposit taking care to observe the MAX
level.
Close water inlet lid.
USE:
Extend the cable completely before plugging
it in.
Connect the appliance to the mains.
Turn the thermostat control to the desired
temperature position.
The pilot light comes on.
Do not use temperatures higher than those
indicated on the garments to be treated.
● Temperature for synthetic fibers
(Polyester, Nylon...).
●● Temperature for silk and wool.
●●● Temperature for cotton. (Minimum
temperature for steam ironing)
Max Temperature for linen.
If garment has various kinds of fibers, select
the temperature for the fiber that requires the
lowest temperature. (For example, select the
temperature for polyester for an article made
out of 60% polyester and 40% cotton).
Wait until the pilot light has gone out which
will indicate that the appliance has reached an
adequate temperature.
During the appliance's use the pilot light will
come on and off automatically, indicating the
heating elements are working, and therefore
maintaining the desired temperature.
DRY IRONING:
The appliance has an option to dry ironing
(without steam). To use this set the steam
selector to the ironing position without steam.

STEAM IRONING:

It is possible to iron with steam whenever
the deposit is filled with water, the adequate
temperature is selected and the steam selector
to the ironing position without steam
STEAM BLAST:
This function proportions extra steam for
eliminating wrinkles.
Press the steam blast button. Wait a few
seconds until vapor penetrates the fibers of the
garment before pushing the button again. For
optimum steam quality, do not apply more than
three successive blasts.
The steam blast button has to be pressed
repeatedly to release the first shot.
VERTICAL STEAMING:
It is possible to iron hanging curtains, items of
clothing on his hanger, etc. To do so, follow the
instructions:
Select the maximum temperature of the iron,
while turning the temperature regulator of the
iron in a clockwise direction.
Wait until the pilot light goes out, which
indicated that the selected temperature has
been reached.
Move the iron in a top to bottom direction while
pressing the steam control. Important: for
cotton and linen, it's recommended to put the
iron base in contact with the material. For other
more delicate fibers, it's recommended to keep
the iron base at some centimeters of distance.
Once you have finished using the appliance:
Select the minimum position (MIN) using the
thermostat control.
Unplug the appliance from the mains.
Remove the water from the inside of the
appliance.
Clean the appliance.
PRACTICAL RECOMMENDATIONS:
Classify the garments into groups by ironing
temperature. The appliance heats up more
quickly than it cools down, therefore, to avoid
accidents, minimize energy consumption
and optimize time, it is advisable to start off
ironing items that require lower temperatures
and progress to those that need higher
temperatures.
Pure wool fabrics (100%) can be ironed with
the iron set to steam. Select a high steam
temperature and place a cotton cloth between
the iron's metal surface and the garment.